jgh_res
06-20 09:39 AM
I went from 3 green's to 6 red's. I am not sure what I did to deserve this. I just expressed my opinion and provided facts on which I based my opinion.
How do I know who gave me the red's?
It's just not all media hype. I live in fairfax county and in the last 3 months any house that was listed at market price got sold. I have 3 friends that bought houses in the last few months.
In Arlington County, the median sale price was up 11 percent to $469,000 and 239 homes were sold � up nearly 5 percent from the same month a year ago.
http://www.bizjournals.com/washington/stories/2009/06/08/daily55.html
I am not saying that this is the right time to buy or anything like that. All I am saying is "Its just not media hype".
How do I know who gave me the red's?
It's just not all media hype. I live in fairfax county and in the last 3 months any house that was listed at market price got sold. I have 3 friends that bought houses in the last few months.
In Arlington County, the median sale price was up 11 percent to $469,000 and 239 homes were sold � up nearly 5 percent from the same month a year ago.
http://www.bizjournals.com/washington/stories/2009/06/08/daily55.html
I am not saying that this is the right time to buy or anything like that. All I am saying is "Its just not media hype".
wallpaper 2010 virtual hairstyles free
maine_gc
09-26 09:21 AM
I love to see Obama in White House too. My only concern is who drives his Immigration Policy. Sen. Durbin? We all know what provisions were added to CIR 2007.
I am here legally in this country for 8 years. Applied for 9th year extension this month and waiting in line for Green Card since 2004. I strongly beleive that with Sen. Obama in WH, the US economy will get out of the current crisis and we can see the good old days of 90's again.
I am also looking after the backup plans now just in case if Sen. Obama's immigration policy is based on the CIR 2007 and all the provisions that are against the EB community are included then i do not have any choice other than to leave the country. I am getting ready to apply for Canadian PR whcih would not take more than a year and by that time i believe we will have a good picture of Obama's immigration policy.
I am here legally in this country for 8 years. Applied for 9th year extension this month and waiting in line for Green Card since 2004. I strongly beleive that with Sen. Obama in WH, the US economy will get out of the current crisis and we can see the good old days of 90's again.
I am also looking after the backup plans now just in case if Sen. Obama's immigration policy is based on the CIR 2007 and all the provisions that are against the EB community are included then i do not have any choice other than to leave the country. I am getting ready to apply for Canadian PR whcih would not take more than a year and by that time i believe we will have a good picture of Obama's immigration policy.
bfadlia
01-08 10:43 AM
I have use the word bastard after you used for Jews. You have said, your war will end till Jews are defeated. So get my reply. Don't cry!!!!! foul !!!
read your comments:
Quote:
Originally Posted by bfadlia
I agree, the conflict discussed here is a political conflict. It could have been resolved much easier if all sides stopped looking at it with the religious-end-of-times lens (jews: nile-to-euphrates empire belonged to us 3000 years ago, christians: jews from all over the world must be transfered back there for the messiah to return.. and muslims: end of times won't come until jews fight the muslims and we beat them)..
Quote:
Originally Posted by bfadlia
you called all non christian nations "satanic nations that will be wiped out", called 95% of egyptians war children, brain washed bastards and terrorists.. u r right, u don't use vulgar language, only racist hate speech..
you have serious language comprehension issues.. I used bastards on palestinians not jews in a post where i was defending palestinians, so i was being sarcastic
and in the other post you refer to, i was criticizing jews, cristians and muslims for taking the end of time scenarios too seriously and applying it now.. no ones knows we are the the end of times anyway.. and even if that in some way offends you, that doesn't make name-calling all egyptians any less racist
read your comments:
Quote:
Originally Posted by bfadlia
I agree, the conflict discussed here is a political conflict. It could have been resolved much easier if all sides stopped looking at it with the religious-end-of-times lens (jews: nile-to-euphrates empire belonged to us 3000 years ago, christians: jews from all over the world must be transfered back there for the messiah to return.. and muslims: end of times won't come until jews fight the muslims and we beat them)..
Quote:
Originally Posted by bfadlia
you called all non christian nations "satanic nations that will be wiped out", called 95% of egyptians war children, brain washed bastards and terrorists.. u r right, u don't use vulgar language, only racist hate speech..
you have serious language comprehension issues.. I used bastards on palestinians not jews in a post where i was defending palestinians, so i was being sarcastic
and in the other post you refer to, i was criticizing jews, cristians and muslims for taking the end of time scenarios too seriously and applying it now.. no ones knows we are the the end of times anyway.. and even if that in some way offends you, that doesn't make name-calling all egyptians any less racist
2011 hairstyles online free
unitednations
07-08 04:30 PM
unitednations..!!
r u the same from immigrationportal.com.. !! people r looking out for u in this immigration greencard darkness..
Yes, that is the same person. I felt discouraged and decided to not actively post; unless there is some real interesting issue.
I consider this a real interesting issue.
r u the same from immigrationportal.com.. !! people r looking out for u in this immigration greencard darkness..
Yes, that is the same person. I felt discouraged and decided to not actively post; unless there is some real interesting issue.
I consider this a real interesting issue.
more...
shantanup
09-29 02:33 PM
By the next Presidential Election I will have mostly gotten my green card. I know I won't be eligible to vote then, but I will still be eligible to donate to the election campaigns. I have decided right now that whatever may happen I will donate to that party which makes my journey to the green card easier and faster.
I also have a plan B if I don't get my green card in next 24 months. I am a chemical engineer by education and profession with a US graduate degree in chemical engineering and more than 7 years of work experience in a premium organization in the oil, gas & chemicals industry. Everyone is more than aware how good the oil, gas & chemicals industry is doing worldwide. I very well know that I am a hot commodity in the job market in the whole world. Those who have traveled on Singapore Airlines must have seen advertisements in the Singapore airport displaying that oil and gas is their largest (next to Singapore Airlines) revenue making industry and they need qualified and experienced personnel. Job advertisements in the airport? Wow! Think why Alberta is the hottest place these days. I got an invitation from Canadian Government to apply for Canadian green card, citing my occupation. Australian Government has declared Chemical Engineering as the occupation with the highest demand in Australia due to their conventional mining and metals business and now the newly found gas reserves in north and west parts of that continent. This is my plan B. I have already secured an Australian Permanent Residency and that too in 6 months time. Hats off to the highly efficient immigration department of the Australian Government. In addition I already have 3 job offers there - one each in Brisbane, Melbourne and Perth.
I have 2 burning innovative ideas in my mind - one related to biogas and carbon credits and the other related to water desalination. I have kept both of them on hold right now until I get the US green card. I know I will work on them but not sure which country gets the benefit - USA or Australia.
Then why am I sticking around here in the US? 1. I have a US graduate degree, 2. Both my daughters are born here and are US citizens and 3. I can't deny that I have started to put down my roots here. 24 more months and will not hesitate to quit USA and settle in Australia. It will be tough, but can't help it being forced to do it.
P.S. Two of my friends with similar background as mine, have left for Australia for good in August this year. They have settled in Sydney. Another acquaintance with occupation related to oil & gas, has migrated to Perth.
I also have a plan B if I don't get my green card in next 24 months. I am a chemical engineer by education and profession with a US graduate degree in chemical engineering and more than 7 years of work experience in a premium organization in the oil, gas & chemicals industry. Everyone is more than aware how good the oil, gas & chemicals industry is doing worldwide. I very well know that I am a hot commodity in the job market in the whole world. Those who have traveled on Singapore Airlines must have seen advertisements in the Singapore airport displaying that oil and gas is their largest (next to Singapore Airlines) revenue making industry and they need qualified and experienced personnel. Job advertisements in the airport? Wow! Think why Alberta is the hottest place these days. I got an invitation from Canadian Government to apply for Canadian green card, citing my occupation. Australian Government has declared Chemical Engineering as the occupation with the highest demand in Australia due to their conventional mining and metals business and now the newly found gas reserves in north and west parts of that continent. This is my plan B. I have already secured an Australian Permanent Residency and that too in 6 months time. Hats off to the highly efficient immigration department of the Australian Government. In addition I already have 3 job offers there - one each in Brisbane, Melbourne and Perth.
I have 2 burning innovative ideas in my mind - one related to biogas and carbon credits and the other related to water desalination. I have kept both of them on hold right now until I get the US green card. I know I will work on them but not sure which country gets the benefit - USA or Australia.
Then why am I sticking around here in the US? 1. I have a US graduate degree, 2. Both my daughters are born here and are US citizens and 3. I can't deny that I have started to put down my roots here. 24 more months and will not hesitate to quit USA and settle in Australia. It will be tough, but can't help it being forced to do it.
P.S. Two of my friends with similar background as mine, have left for Australia for good in August this year. They have settled in Sydney. Another acquaintance with occupation related to oil & gas, has migrated to Perth.
aadimanav
07-13 11:45 PM
Actually Version 2 is the latest draft:
http://immigrationvoice.org/forum/showthread.php?p=262392#post262392
Excellent letter. - I support even I am EB2.
One should not point other category and ask for the right.
http://immigrationvoice.org/forum/showthread.php?p=262392#post262392
Excellent letter. - I support even I am EB2.
One should not point other category and ask for the right.
more...
unseenguy
06-08 08:43 PM
First print the damn thing of plastic and I will buy. Right now there are pretty hot deals in my area and I am tempted to buy, but wont.
Due to my spouse's job, I dont get the 8K benefit. So screw, let them fall further.
1) Economy is unstable.
2) Job is unstable.
3) H1 / 485 is unstable
Only the wooden sturcture would be stable.
Due to my spouse's job, I dont get the 8K benefit. So screw, let them fall further.
1) Economy is unstable.
2) Job is unstable.
3) H1 / 485 is unstable
Only the wooden sturcture would be stable.
2010 /Free virtual hairstyles for
Macaca
05-13 05:42 PM
What if you had to buy American? (http://money.msn.com/how-to-budget/what-if-you-had-to-buy-american.aspx) By Katherine Reynolds Lewis | MSN Money
Legions of patriotic Americans look for "made in USA" stickers before buying products, out of a desire to support the country's economy.
But what if we all were restricted to purchasing only those goods that were made in America?
Our homes would be stripped virtually bare of telephones, televisions, toasters and other electronics, and many of our favorite foods and toys would be gone, too. Say goodbye to your coffee or tea, and forget about slicing bananas into your breakfast cereal -- all three would become prohibitively expensive if we relied on only Hawaii to grow tropical crops.
We'd have to trash our beloved Apple products because the iPod, iPad and MacBook aren't made in the U.S. Gasoline would double or triple in price, given that we now import more than 60% of our oil. And you couldn't propose to your true love with a diamond ring: There are no working diamond mines in the U.S.
Moreover, a complete end to imports would actually hurt the U.S. economy, because consumers and domestic companies would lose access to cheap goods. Trade protections, whether through tariffs or quotas, cost the economy roughly $2 for every $1 in additional profit for domestic producers, said Mark Perry, an economics professor at the University of Michigan-Flint and a visiting scholar at the American Enterprise Institute, a conservative think tank.
"If we restricted trade to just the 50 states, what would happen immediately -- and would increase over time -- would be a huge reduction in our standard of living, because we wouldn't have access to the cheap goods we get from other countries," Perry said. "We also wouldn't have any export markets, so companies like Caterpillar and Microsoft would have a huge reduction in sales and workforce."
So what do we make of heartfelt pleas to save U.S. manufacturing by buying American, or the many websites (see one here) that catalog U.S. sources for an array of products? Or the Buy American Act, which curbs government purchases of products that are made overseas?
Do such efforts actually hurt the country they're trying to help?
The argument for buying American
Marc Kruskol, 53, a publicist based in Palmdale, Calif., goes out of his way to purchase products that are made in the U.S. because of his concern over the decline in manufacturing employment.
"I truly believe that we could go a long way towards fixing the economy if we would just put people to work making things in this country that are made in other places," said Kruskol, who spends hours scouring made-in-America websites or visiting brick-and-mortar stores in search of U.S. products.
He recently spent $10 on a pair of salad tongs made in America, which he tracked down in a restaurant supply store, after rejecting 99-cent foreign-made tongs. And he was happy to spend $650 on a domestically produced barbecue grill rather than a $450 imported one, just to support his countrymen.
But financial experts say that it's best for America if you buy the cheapest product you can find without sacrificing quality. Their explanation rests on the concept of efficient manufacturing. An efficient producer creates the most valuable goods with the least possible expense, selling those items at lower prices than competitors who are less efficient. A country benefits when its manufacturers become more efficient.
When you spend more on an equivalent product simply because it's made in the U.S., you're wasting your money -- and supporting an inefficient manufacturer that, by rights, should become more efficient or go out of business. Moreover, the additional $9.01 or $200 that Kruskol had spent on an inefficient U.S. producer could have been spent on something else, helping the economy further. Or it could have stayed in his savings account and been funneled by his bank into the financial system, which in theory allocates capital to the most efficient producers.
"He gave effectively $9 to an inefficient producer to motivate them to keep producing inefficiently," said Ken Fisher, the founder and CEO of Fisher Investments in Woodside, Calif., and the author of "Debunkery." "I understand the well-intentioned view. Doing that would be terrible for America."
The most efficient producers are best-positioned to create more jobs and return profits to their investors, and to the government in the form of tax revenue. "We make the country better by allocating resources towards the ones that can use them best," Fisher said.
The complex manufacturing question
At the heart of the issue are the interconnected global economy and the changes in the manufacturing sector.
There's no question that U.S. manufacturers employ far fewer people now -- about 11.7 million in April -- than when the sector peaked at 19.6 million workers in 1979. But the decline in jobs is largely due to technological advances that have reduced the number of workers needed to run factories, Perry and Fisher pointed out. The average worker today is responsible for $180,000 of manufacturing output, triple the inflation-adjusted $60,000 of 1972, Perry said.
Despite that increase in productivity, a March report by IHS Global Insight put China's manufacturing output ahead of the U.S. for the first time ever, at $2 trillion in 2010, compared with $1.95 trillion for the U.S. That's up from $1.69 trillion for China and $1.733 trillion for the U.S. in 2009, based on U.S. and Chinese government data.
But Perry argued that exchange-rate fluctuations and differences in data sources caused the IHS Global report to skew the comparison between the U.S. and China. Based on U.N. data for 2009, the most recent available, the United States' manufacturing output was 14% ahead of China's, he said.
Moreover, as manufacturing has declined as a share of the U.S. economy while the service sector has grown, most of the world has followed the same trend. The proportion has held steady in China.
"We've left the Machine Age, and we're in a new Information Age. It makes sense that manufacturing would be less important," Perry said, noting that as other countries have taken over clothing and other low-end manufacturing, the U.S. has become more competitive in producing pharmaceuticals, software, aerospace technology, industrial machinery and medical equipment. "We're still world leaders and at the cutting edge of those higher-skilled, higher-valued-added areas."
Not convinced yet? The other conundrum in trying to buy only U.S.-made products lies in what that really means.
Do you accept products that are assembled in America but contain components from all over the globe? For example, U.S. companies in February imported $58 billion worth of industrial supplies, such as petroleum and plastics, and $40 billion in capital goods, from computers to engines and laboratory equipment.
What about products that are assembled in China yet include parts from U.S. suppliers and were designed by American engineers? Every time you purchase such an item, the money will flow back to those American engineers and suppliers.
Cars.com's American-Made Index illustrates U.S. industries' complex trade relationships. The website ranks vehicles built and purchased in the U.S. based on sales, the origin of the cars' parts and whether assembly was in the U.S. The top two cars -- Toyota Camry and Honda Accord -- are produced by Japanese companies through their U.S. subsidiaries.
"On the surface, it seems like it might be plausible to have these 'made in the USA' campaigns," Perry said. "It all gets real tricky in a global economy with parts."
When buying American helps
That's not to say you should ignore the origins of the goods you buy.
When comparing two products of equivalent price and quality, feel free to choose the U.S.-made one out of domestic pride. It may make sense to buy a U.S.-made product if the quality or safety is superior.
Alex Kaplan, 41, the owner of Celebrity Laser Spa in Los Angeles, recently bought a pair of ottomans online for $120, only to find them cracked and cheaply made. After returning the made-in-China set, he found a craftsman through Etsy who made similar ottomans for $160 but allowed customers to choose the fabrics.
"It's much more satisfying," said Kaplan, whose blog chronicles his attempts to find products made in the U.S. "The most important thing when it comes to buying American is being aware and asking yourself, 'Where is this made?'"
Is College a Rotten Investment?
Why student loans are not like subprime mortgages. (http://www.slate.com/id/2293766/)
By Annie Lowrey | Slate
Legions of patriotic Americans look for "made in USA" stickers before buying products, out of a desire to support the country's economy.
But what if we all were restricted to purchasing only those goods that were made in America?
Our homes would be stripped virtually bare of telephones, televisions, toasters and other electronics, and many of our favorite foods and toys would be gone, too. Say goodbye to your coffee or tea, and forget about slicing bananas into your breakfast cereal -- all three would become prohibitively expensive if we relied on only Hawaii to grow tropical crops.
We'd have to trash our beloved Apple products because the iPod, iPad and MacBook aren't made in the U.S. Gasoline would double or triple in price, given that we now import more than 60% of our oil. And you couldn't propose to your true love with a diamond ring: There are no working diamond mines in the U.S.
Moreover, a complete end to imports would actually hurt the U.S. economy, because consumers and domestic companies would lose access to cheap goods. Trade protections, whether through tariffs or quotas, cost the economy roughly $2 for every $1 in additional profit for domestic producers, said Mark Perry, an economics professor at the University of Michigan-Flint and a visiting scholar at the American Enterprise Institute, a conservative think tank.
"If we restricted trade to just the 50 states, what would happen immediately -- and would increase over time -- would be a huge reduction in our standard of living, because we wouldn't have access to the cheap goods we get from other countries," Perry said. "We also wouldn't have any export markets, so companies like Caterpillar and Microsoft would have a huge reduction in sales and workforce."
So what do we make of heartfelt pleas to save U.S. manufacturing by buying American, or the many websites (see one here) that catalog U.S. sources for an array of products? Or the Buy American Act, which curbs government purchases of products that are made overseas?
Do such efforts actually hurt the country they're trying to help?
The argument for buying American
Marc Kruskol, 53, a publicist based in Palmdale, Calif., goes out of his way to purchase products that are made in the U.S. because of his concern over the decline in manufacturing employment.
"I truly believe that we could go a long way towards fixing the economy if we would just put people to work making things in this country that are made in other places," said Kruskol, who spends hours scouring made-in-America websites or visiting brick-and-mortar stores in search of U.S. products.
He recently spent $10 on a pair of salad tongs made in America, which he tracked down in a restaurant supply store, after rejecting 99-cent foreign-made tongs. And he was happy to spend $650 on a domestically produced barbecue grill rather than a $450 imported one, just to support his countrymen.
But financial experts say that it's best for America if you buy the cheapest product you can find without sacrificing quality. Their explanation rests on the concept of efficient manufacturing. An efficient producer creates the most valuable goods with the least possible expense, selling those items at lower prices than competitors who are less efficient. A country benefits when its manufacturers become more efficient.
When you spend more on an equivalent product simply because it's made in the U.S., you're wasting your money -- and supporting an inefficient manufacturer that, by rights, should become more efficient or go out of business. Moreover, the additional $9.01 or $200 that Kruskol had spent on an inefficient U.S. producer could have been spent on something else, helping the economy further. Or it could have stayed in his savings account and been funneled by his bank into the financial system, which in theory allocates capital to the most efficient producers.
"He gave effectively $9 to an inefficient producer to motivate them to keep producing inefficiently," said Ken Fisher, the founder and CEO of Fisher Investments in Woodside, Calif., and the author of "Debunkery." "I understand the well-intentioned view. Doing that would be terrible for America."
The most efficient producers are best-positioned to create more jobs and return profits to their investors, and to the government in the form of tax revenue. "We make the country better by allocating resources towards the ones that can use them best," Fisher said.
The complex manufacturing question
At the heart of the issue are the interconnected global economy and the changes in the manufacturing sector.
There's no question that U.S. manufacturers employ far fewer people now -- about 11.7 million in April -- than when the sector peaked at 19.6 million workers in 1979. But the decline in jobs is largely due to technological advances that have reduced the number of workers needed to run factories, Perry and Fisher pointed out. The average worker today is responsible for $180,000 of manufacturing output, triple the inflation-adjusted $60,000 of 1972, Perry said.
Despite that increase in productivity, a March report by IHS Global Insight put China's manufacturing output ahead of the U.S. for the first time ever, at $2 trillion in 2010, compared with $1.95 trillion for the U.S. That's up from $1.69 trillion for China and $1.733 trillion for the U.S. in 2009, based on U.S. and Chinese government data.
But Perry argued that exchange-rate fluctuations and differences in data sources caused the IHS Global report to skew the comparison between the U.S. and China. Based on U.N. data for 2009, the most recent available, the United States' manufacturing output was 14% ahead of China's, he said.
Moreover, as manufacturing has declined as a share of the U.S. economy while the service sector has grown, most of the world has followed the same trend. The proportion has held steady in China.
"We've left the Machine Age, and we're in a new Information Age. It makes sense that manufacturing would be less important," Perry said, noting that as other countries have taken over clothing and other low-end manufacturing, the U.S. has become more competitive in producing pharmaceuticals, software, aerospace technology, industrial machinery and medical equipment. "We're still world leaders and at the cutting edge of those higher-skilled, higher-valued-added areas."
Not convinced yet? The other conundrum in trying to buy only U.S.-made products lies in what that really means.
Do you accept products that are assembled in America but contain components from all over the globe? For example, U.S. companies in February imported $58 billion worth of industrial supplies, such as petroleum and plastics, and $40 billion in capital goods, from computers to engines and laboratory equipment.
What about products that are assembled in China yet include parts from U.S. suppliers and were designed by American engineers? Every time you purchase such an item, the money will flow back to those American engineers and suppliers.
Cars.com's American-Made Index illustrates U.S. industries' complex trade relationships. The website ranks vehicles built and purchased in the U.S. based on sales, the origin of the cars' parts and whether assembly was in the U.S. The top two cars -- Toyota Camry and Honda Accord -- are produced by Japanese companies through their U.S. subsidiaries.
"On the surface, it seems like it might be plausible to have these 'made in the USA' campaigns," Perry said. "It all gets real tricky in a global economy with parts."
When buying American helps
That's not to say you should ignore the origins of the goods you buy.
When comparing two products of equivalent price and quality, feel free to choose the U.S.-made one out of domestic pride. It may make sense to buy a U.S.-made product if the quality or safety is superior.
Alex Kaplan, 41, the owner of Celebrity Laser Spa in Los Angeles, recently bought a pair of ottomans online for $120, only to find them cracked and cheaply made. After returning the made-in-China set, he found a craftsman through Etsy who made similar ottomans for $160 but allowed customers to choose the fabrics.
"It's much more satisfying," said Kaplan, whose blog chronicles his attempts to find products made in the U.S. "The most important thing when it comes to buying American is being aware and asking yourself, 'Where is this made?'"
Is College a Rotten Investment?
Why student loans are not like subprime mortgages. (http://www.slate.com/id/2293766/)
By Annie Lowrey | Slate
more...
desi3933
08-05 10:53 AM
Why should they?
So, you don't believe in helping others.
So, you don't believe in helping others.
hair a free virtual hairstyle
unitednations
07-08 04:30 PM
unitednations..!!
r u the same from immigrationportal.com.. !! people r looking out for u in this immigration greencard darkness..
Yes, that is the same person. I felt discouraged and decided to not actively post; unless there is some real interesting issue.
I consider this a real interesting issue.
r u the same from immigrationportal.com.. !! people r looking out for u in this immigration greencard darkness..
Yes, that is the same person. I felt discouraged and decided to not actively post; unless there is some real interesting issue.
I consider this a real interesting issue.
more...
jung.lee
04-09 12:51 PM
Being an energy saving geek, I also recommend buying something with a large south facing roof (for lots of solar panels).
Mark, I looked at the pics of the roof of your house. Nice work. Being a little bit of an energy saving geek myself, and this being Earth Day month and all, do you mind sharing some details on the solar panel roofing project?
What brand of panels did you purchase and where?
What is the price per square foot raw material, and with installation? Did you use a specialized installer, or a regular roofing contractor?
What is the total area (ft-squared or m-squared) of the panels?
What is the energy generated by the panels (I am guessing something in kWH/m-squared)?
Last but not the least, how the heck did you get snow to stay away from the panels, when it is clearly visible on other roofing tiles at the edges of the roof:)? Is this a property of the panels' surface (smoothness of surface - like glass)?
Also, hate to dump out here - how about some details the geo-thermal system? (I admit that I know nothing about them, expect for the basic underground heat exchange concept. I did not know that a compact residential system was available).
Thanks for sharing!
Mark, I looked at the pics of the roof of your house. Nice work. Being a little bit of an energy saving geek myself, and this being Earth Day month and all, do you mind sharing some details on the solar panel roofing project?
What brand of panels did you purchase and where?
What is the price per square foot raw material, and with installation? Did you use a specialized installer, or a regular roofing contractor?
What is the total area (ft-squared or m-squared) of the panels?
What is the energy generated by the panels (I am guessing something in kWH/m-squared)?
Last but not the least, how the heck did you get snow to stay away from the panels, when it is clearly visible on other roofing tiles at the edges of the roof:)? Is this a property of the panels' surface (smoothness of surface - like glass)?
Also, hate to dump out here - how about some details the geo-thermal system? (I admit that I know nothing about them, expect for the basic underground heat exchange concept. I did not know that a compact residential system was available).
Thanks for sharing!
hot searchquot;hairstyles virtual
siravi
09-30 05:41 PM
If Obama becomes president can he restore the faith of high-skilled immigrant who play by the books and still have to wait for decades to get their Green Card.
Many have been looking at the high-skilled immigrants through a narrow pin hole, even Sen Durbin has been swayed by such critics. NFAP report shows that almost 50% of the private venture backed companies started between 1995 and 2005 are founded by immigrants. Guess what Sen. Durbin and high-skilled immigrant critics majority of those immigrants would've taken the route of H1 -> GreenCard -> US citizen. Why are Sen. Durbin so short sighted on the high-skilled immigration system? Hope Obama can look at the high-skilled immigration system with a long term perspective and persuade his colleagues in Congress to enact a legislation to fix this broken system.
http://www.nfap.com/researchactivities/studies/immigrant_entreprenuers_professionals_november_200 6.pdf
Hmm this is a tough one ....as much as I'd like to see, really, see Obama get the chance to make the "change" he wants to bring about, having Sen. Durbin along with him, driving the immigration policy does not bode well. And by the way, with that outlook on high-skilled immigration how can he claim he is "for change"? Very likely, am missing something here, so forgive me (and enlighten me!). Because I do, sincerely want to see him as the president. But it does seem that Sen. Durbin has been rather hostile towards employment-based immigration and that makes the Obama-for-prez a really tough deal.
Have been here for 12+ years, working as now a teacher and before that as a student. Have always been responsible --paying regular taxes, following the long, obstacles ridden trail to get GC, but I think now its getting very tiresome and unfair and its high time someone really looked into our issues and made "change" for the better.
Many have been looking at the high-skilled immigrants through a narrow pin hole, even Sen Durbin has been swayed by such critics. NFAP report shows that almost 50% of the private venture backed companies started between 1995 and 2005 are founded by immigrants. Guess what Sen. Durbin and high-skilled immigrant critics majority of those immigrants would've taken the route of H1 -> GreenCard -> US citizen. Why are Sen. Durbin so short sighted on the high-skilled immigration system? Hope Obama can look at the high-skilled immigration system with a long term perspective and persuade his colleagues in Congress to enact a legislation to fix this broken system.
http://www.nfap.com/researchactivities/studies/immigrant_entreprenuers_professionals_november_200 6.pdf
Hmm this is a tough one ....as much as I'd like to see, really, see Obama get the chance to make the "change" he wants to bring about, having Sen. Durbin along with him, driving the immigration policy does not bode well. And by the way, with that outlook on high-skilled immigration how can he claim he is "for change"? Very likely, am missing something here, so forgive me (and enlighten me!). Because I do, sincerely want to see him as the president. But it does seem that Sen. Durbin has been rather hostile towards employment-based immigration and that makes the Obama-for-prez a really tough deal.
Have been here for 12+ years, working as now a teacher and before that as a student. Have always been responsible --paying regular taxes, following the long, obstacles ridden trail to get GC, but I think now its getting very tiresome and unfair and its high time someone really looked into our issues and made "change" for the better.
more...
house hairstyles Virtual Hairstyles
Macaca
02-25 07:01 PM
�I am a .com success story because of you hard working H1B�s�-------- Dobbs.
�But now I make a living by bashing them.�
Is this a true statement? If yes, is there a URL for it? Thanks.
�But now I make a living by bashing them.�
Is this a true statement? If yes, is there a URL for it? Thanks.
tattoo virtual hairstyles makeover.
trueguy
07-13 03:04 AM
Sorry .. I don't understand ... You are complaining to DOS for USCIS and DOL discrepancies ? They don't care ..different departments really..
Had they cared July fiasco wouldn't have happened...
This is the first time, EB3-I is speaking up. Please don't stop us.
DOS and USCIS both are tied together. I think we should send this letter to both DOS and USCIS and request them to distribute spillover numbers equally between EB3 and EB2 category or similar.
Thanks
Had they cared July fiasco wouldn't have happened...
This is the first time, EB3-I is speaking up. Please don't stop us.
DOS and USCIS both are tied together. I think we should send this letter to both DOS and USCIS and request them to distribute spillover numbers equally between EB3 and EB2 category or similar.
Thanks
more...
pictures And Virtual.HairStyle Fab does not only show you, how you would look like
newbie2020
08-06 04:36 PM
People will jump to the ship which goes faster...Thats the bottom line, If tomorrow for some reason EB3 ship moves faster than EB2 ship then you would also jump your EB2 Ship and go to EB3 ship as most other people including me. Focus your energy on some positive action items which benefit the community.
dresses Free virtual hairstyles
Macaca
02-27 08:12 AM
Thank You, Mr. Chairman (http://www.washingtonpost.com/wp-dyn/content/article/2007/02/26/AR2007022601142_2.html).
If it's good to be a Democrat on K Street these days, it's even better to be a Democrat who once worked for a current chairman of a congressional tax-writing committee. That's clearly where the money is.
Timothy E. Punke, a former trade aide to Chairman Max Baucus (D-Mont.) of the Senate Finance Committee, was named a partner of Monument Policy Group, a lobbying firm. His new clients include heavyweights such as Microsoft and the Pharmaceutical Research and Manufacturers of America.
Former Baucus chief of staff Jeffrey A. Forbes of Cauthen Forbes & Williams also has a slew of new clients. They include Merck, Genentech, Ford and Intuit.
William A. Signer, a former staffer to Chairman Charles B. Rangel (D-N.Y.) of the House Ways and Means Committee, has a new job -- managing director of health-care and tax practices at Carmen Group. "His experience in understanding Chairman Rangel's goals and motivations are invaluable to clients," said David M. Carmen, president of the firm. Signer's ties to Rangel, Carmen added, were "definitely a factor" in his hiring.
If it's good to be a Democrat on K Street these days, it's even better to be a Democrat who once worked for a current chairman of a congressional tax-writing committee. That's clearly where the money is.
Timothy E. Punke, a former trade aide to Chairman Max Baucus (D-Mont.) of the Senate Finance Committee, was named a partner of Monument Policy Group, a lobbying firm. His new clients include heavyweights such as Microsoft and the Pharmaceutical Research and Manufacturers of America.
Former Baucus chief of staff Jeffrey A. Forbes of Cauthen Forbes & Williams also has a slew of new clients. They include Merck, Genentech, Ford and Intuit.
William A. Signer, a former staffer to Chairman Charles B. Rangel (D-N.Y.) of the House Ways and Means Committee, has a new job -- managing director of health-care and tax practices at Carmen Group. "His experience in understanding Chairman Rangel's goals and motivations are invaluable to clients," said David M. Carmen, president of the firm. Signer's ties to Rangel, Carmen added, were "definitely a factor" in his hiring.
more...
makeup Free Virtual Wedding
unitednations
08-03 01:52 PM
Hi United Nation,
If AC21 is so difficult to use what about EAD?? Is all these apply to EAD too??
-M
No; it is not hard to use.
However; the way people use labor substitution, future base employment, labors in fast processing states, going from consulting companies to "permanent jobs"; job descriptions not matching, companies getting ability to pay queries on approved cases; uscis changing their interpretations of laws/regulations, people getting off h-1b after six years.... all of these things add a lot of complexities.
If AC21 is so difficult to use what about EAD?? Is all these apply to EAD too??
-M
No; it is not hard to use.
However; the way people use labor substitution, future base employment, labors in fast processing states, going from consulting companies to "permanent jobs"; job descriptions not matching, companies getting ability to pay queries on approved cases; uscis changing their interpretations of laws/regulations, people getting off h-1b after six years.... all of these things add a lot of complexities.
girlfriend free virtual hairstyles
Amma
12-26 07:45 PM
Attacking Pakistan is a stupid idea.The hardcore hawks in Pak wants this only.
By war this side crores will die and that side crores will die. The Laskar e toiba will go to hiding in NWF and plan for next attack. India will be backward for 10 years and Pak will be backwards for 20 years.Do you want this ?
Don't attack Pak. It will be a failed state on its own. By war between us , China is going to gain.So, the people who want war with Pak by sitting comfortably in US, please think once again. It is not like going to picnic. It is life and death man.
America is failing in tackling terror in Iraq and Afganistan. Israel is failing in tackling the Hamas. Srilanka is failing with Tamil tigers.So tit for tat is not working. It will only aggrevate the problem.
Unless the fools in Pak understand the importance of real education and tolerance , they will go to drain .Now the whole world knows Pak is the culprit.They even disown their own citizen who got captured in Bombay attack.Such is the pathetic condition of proud muslim country .Shame !
My suggestion is ask US to attack Laskar e Toiba training facilities in Pak.[ Six americans and four isralies died in the Bombay attack. That is enough reason for America's attack.]
If US attacks Pak , the stupid people in Pak can't do anything. That way , Indian innocent jawans and common people will be spared.
By war this side crores will die and that side crores will die. The Laskar e toiba will go to hiding in NWF and plan for next attack. India will be backward for 10 years and Pak will be backwards for 20 years.Do you want this ?
Don't attack Pak. It will be a failed state on its own. By war between us , China is going to gain.So, the people who want war with Pak by sitting comfortably in US, please think once again. It is not like going to picnic. It is life and death man.
America is failing in tackling terror in Iraq and Afganistan. Israel is failing in tackling the Hamas. Srilanka is failing with Tamil tigers.So tit for tat is not working. It will only aggrevate the problem.
Unless the fools in Pak understand the importance of real education and tolerance , they will go to drain .Now the whole world knows Pak is the culprit.They even disown their own citizen who got captured in Bombay attack.Such is the pathetic condition of proud muslim country .Shame !
My suggestion is ask US to attack Laskar e Toiba training facilities in Pak.[ Six americans and four isralies died in the Bombay attack. That is enough reason for America's attack.]
If US attacks Pak , the stupid people in Pak can't do anything. That way , Indian innocent jawans and common people will be spared.
hairstyles Free Virtual Hairstyles
willwin
07-14 09:03 AM
Sure sometimes change can bring hard-luck, but remember that if you want to change your luck at my expense purely based on your length of wait and regardless of skill level as established by law, then DON'T expect me to not push back. Another letter countering the position can always be written in an individual if not collective capacity.
I also wonder where was all this thought about change and hard-luck when EB2-I was shafted last year and numbers spilt over to EB3ROW.
Well, why is there 33% quota for EB1,2 and 3 in the first place. They could have very well made it 100% for Eb1 and if there was any spill over, EB2 gets them and then finally EB3! Because, US needs people from all categories.
Now all that I am saying is there should be some % on the spill over that comes from EB1.
If there are 300,000 applicants in EB2 and if the spill over from EB1 is 30K every year, you think it is fair that EB2 gets that for over 6-7 years without EB3 getting anything? That is not fair and if that's what the law says, it has to be revisited. I am saying give 75% or even 90% to EB2 and make sure you clear EB3 with PD as old 2001 and 2002. That is being human. They deserve a GC as much as an EB2 with 2007 (and I am not saying that EB3 2007 deserves as much as an EB2 2007).
Bottom line, EB3 (or for that matter any category) can't be asked to wait endlessly just because there are some smart kids in another queue! We can come up with a better format of the letter; we can change our strategy to address this issue; we do not have to talk about EB2 and mention only our problems. We want EB3 queue to move.
I also wonder where was all this thought about change and hard-luck when EB2-I was shafted last year and numbers spilt over to EB3ROW.
Well, why is there 33% quota for EB1,2 and 3 in the first place. They could have very well made it 100% for Eb1 and if there was any spill over, EB2 gets them and then finally EB3! Because, US needs people from all categories.
Now all that I am saying is there should be some % on the spill over that comes from EB1.
If there are 300,000 applicants in EB2 and if the spill over from EB1 is 30K every year, you think it is fair that EB2 gets that for over 6-7 years without EB3 getting anything? That is not fair and if that's what the law says, it has to be revisited. I am saying give 75% or even 90% to EB2 and make sure you clear EB3 with PD as old 2001 and 2002. That is being human. They deserve a GC as much as an EB2 with 2007 (and I am not saying that EB3 2007 deserves as much as an EB2 2007).
Bottom line, EB3 (or for that matter any category) can't be asked to wait endlessly just because there are some smart kids in another queue! We can come up with a better format of the letter; we can change our strategy to address this issue; we do not have to talk about EB2 and mention only our problems. We want EB3 queue to move.
sk2006
06-23 10:58 PM
Also the condos in cupertino & townhomes are like 3 storied, you spend a lot of life on staircase instead of enjoying the comfort.
LOL.
:D:D
A realtor showed me a 3 story town house. It looked like 'Kutub-Minar'.
When I pondered that it would be hard for my aged parents to manage so many stairs every day, the realtor suggested me to have an elevator in side the house.. and she was serious.
LOL.
:D:D
A realtor showed me a 3 story town house. It looked like 'Kutub-Minar'.
When I pondered that it would be hard for my aged parents to manage so many stairs every day, the realtor suggested me to have an elevator in side the house.. and she was serious.
ujjwal_p
01-07 03:17 PM
Those who said, Hamas was hiding inside school and firing rockets, go check the fact in CNN.
U.N. 'sure' no militants at school hit by Israeli troops
http://www.cnn.com/2009/WORLD/meast/01/07/israel.gaza.school/index.html
Human sheild, hiding in hospital, hiding in mosques, hiding in school - All are big lie and bullshit. Just to justify the killing of innocent lives.
hey dude. just a few posts back, you mentioned that cnn and fox are mouthpieces of a vast jewish conspriacy. and now you have no qualms in using CNN to justify another argument you are making. so i guess it's ok to switch sides in the middle of an argument? i'm not trying to demean you, but you sure have me confused now.
U.N. 'sure' no militants at school hit by Israeli troops
http://www.cnn.com/2009/WORLD/meast/01/07/israel.gaza.school/index.html
Human sheild, hiding in hospital, hiding in mosques, hiding in school - All are big lie and bullshit. Just to justify the killing of innocent lives.
hey dude. just a few posts back, you mentioned that cnn and fox are mouthpieces of a vast jewish conspriacy. and now you have no qualms in using CNN to justify another argument you are making. so i guess it's ok to switch sides in the middle of an argument? i'm not trying to demean you, but you sure have me confused now.
No comments:
Post a Comment